Відео

I bought one of the original little green ones absolutely eons ago when I started renovating my 1st house, believe it or not it was actually a good little saw that I still use today as it's bang on square after some serious abuse so it still sees some action for basic framing etc. Based on my experience with my little green saw I thought I'd buy one of the large orange models when I was re-building my cut roof as I needed to cut loads of 9x2s at angles etc, which were too big a cut for my little green saw. Wow what a piece of crap that orange saw was! It couldn't stay anywhere near square or calibrated to save it's life, completely put me off buying the Evo in future.

Nice

but the tank drain is at the top now do not forget to take it down from time to time and drain it properly

Hey! Did you go CSM? You look familiar

You need to make the under side of the level absolutely flat, because that is what it is calibrated against. It is nice if it looks good, but that part has to BE good. And make sure the vials are reading level.

Put a drop of vinegar on those screw heads, and then put a little wad of toilet paper them, also soaked in vinegar. Put some cling wrap around them and let them sit overnight. They should come right out.

Nicé védio liké 68🎉🎉❤❤❤❤

I wasnt very happy to see you using your digital caloipers as a spanner wrench not very profesonal in my opinion you could have used a pair of channel locks instead so now you cannot use your calipers for any thing except a spanner

😤😡KAPLA Πατριώτη... it's a very honourable ceremony the tusk of making a weapon for a warrior.... ...με αυτό κόβεις και το χαλούμι? 😂😁👍

Thank you for the information!!!

I wasted half a spool, thinking my tolerances weren't sufficient. Turns out the mini rhombusd when it should have squared. The official documentation is still clueless about this possibility. Thank you for the video, but that didn't solve my problem, which is that the X axis is not perpendicular to the Y. The plate is fine. The arm of the X axis is at the end tilted forward a couple of degrees.

Or to most of the world, just making coffee..

Cypriot , Turkish, Armenian, Bali coffee.. + whole middle east.

I believe this method makes the greatest quality of coffee in the world!😊 I guess the centrifugal force they create an excellent blend... Δώστου νά καταλάβει Σάβα 😂

❤Saya lihat vidio kamu bagus sayang ❤❤😅😢

😂 you lunatic... 😅 Ά ρε πατρίδα...

Nice job, and this is a rare homemade tool build. We shared this video on our homemade tools forum last week 😎

T 8:41 hank you

Not to be that guy, but that was kinda worthless

It doesn’t work brother😂

❤❤🎉❤🎉❤🎉❤

What a waist of time😂

Qell this explains my pro arms with my glass kiln.

😂😂😂😂😂😂😂😂

STL Files and Parts List are available to download for FREE from my website shop: miscpro.com/shop/

I am a bit confused about the last improvement, "front facing mirror and a two way see throuh mirror" what is a front facing mirror? * 2 way see through mirror? Looked for the files on the web site, could not find them. Thanks and great work

Μπράβο Σάββα!!! Εξαιρετική δουλειά!!!

Lol. Romantic peanut candle..first laugh of the day...thanks

I "Liked" it... why did I "Like" it?... I don't know... I JUST DID! 😜

5.50 minutes of my life lost. Thank you for that.

That was a waste of 6 minutes.

Was that John Fahey at the end there? I think he'd approve of a tin of baked beans with an identity crisis. Well, not a crisis really. More in the the area of a hobby. Insect cosplay.

I’m here if you feel you need to talk to someone Savvas 🤪 🤔

🎶 “I look like a ladybird I look like a ladybird But I’m actually a tin of baked beans!” 🎶 😊

Excellent.

I did something similar but I didn’t have any magnets too hand. I placed a piece of 1mm acrylic sheet over the face held by 2 5mm bolts and 2 washers made spacers. Using a flush cut saw I’m getting great results.

What's the plug name?

As an aircraft mechanic, I have seen the Rat (Ram Air Turbine) deployed every time an aircraft came into the hangar for a major check.

Brilliant! Perfect instructions without anything unnecessary.Thank you!

Where do you plan sticking it in?

I can't watch asmr type stuff, so I just skimmed but pretty nice.

both

Reminds of that multi colour sweetcorn you can grow for some reason.

..? 🤔

That so smart laser on a reflecting surface🎉

Hi guy. I did this with a ten watt laser voa accident. I was meaning to inscribe the glass and went at high power at a fast speed and got a clean cut. I remembered half a year later and looked it up on youtube. o7

Nice idea bro.

Hi , I have just acquired the very same machine. Just seen your very informative video. I am in the process of refurbing it. The in feed table needs adjusting, which thanks to you, I now know how to. There is no locking handle to the fence. Any chance of a picture of it I think it will have to be made. Thanks again.

When a nail bends & you cant back it out grip the nail just behind the tapered point with linesman's pliers & tap with hammer til it backs out. If u keep bending the nail the metal will be soft & wont stay straight.

Hi I cant find the digital plans on your Patreon.